Main menu

Pages

 


 Swipe Card

   - This is located on the right-hand side of the table in the admin room, It won’t count if you go too fast or too slow.



Fix Wires  


- Three different wires tasks involve matching up colored wires are located in Admin, Cafeteria, Electrical, Navigation, Security, or Storage


Upload Data From 

  - There are several Upload Data tasks, which each start in different rooms; Cafeteria, Communications, Electrical, Navigation, or Weapons & Admin.


Empty Garbage
 
 - This is a two-part task, one in Cafeteria and the other one located in Storage.  Click the switch, then hold down the lever to empty the chute.



Calibrate Distributor 

 - is a short task in the Electrical room, Select the box with the high voltage sign. and line up the three rectangles spinning around the circle. They all have to stop on the right, connected to the distributor plugs.



Divert Power To 


 - There are several tasks located in Electrical Admin, Communications, Lower Engine, Navigation, O2, Reactor, Security, or Upper Engine,You must access one of those locations  and divert power to the weapons by sliding its indicator all the way up.



Align Engine Output 

 - can be completed in any order in both Upper Engine and Lower Engine, by dragging the engine diagram on the left so that the middle line aligns with the graph. Once you line it up perfectly, release the gauge.


Submit Scan 

 - this is a visual task located in MedBay, do the task  Simply by interacting with the scanner to scan yourself. The process will be done automatically and only takes  10 seconds.

Inspect Sample 
 
 - is another task that's located within the computer on the right wall of the Medbay laboratory, click on the button to start the process and wait 60 seconds for the counter to finish, Afterwords you can go and complete other tasks then come back to identify the abnormal sample. Observe the samples press the green button below the red colored sample in order to complete the task.



Chart Course 

 - is an easy task located in the navigation room. You must zig-zag the spaceship within the dotted line provided until you reach the end.


Stabilize Steering

  - is another simple task located in the navigation room, complete it Simply by dragging the crosshair on the panel to the center of the screen.

Empty Chute
 
  - is a Visual, Long task located in O2 and Storage rooms to complete it, just click and down drag the lever right to the trash chute down and keep holding it for a few seconds, Don’t release it until all the trash is gone.
Clean O2 Filter a simple Short task when you have to Drag all the floating leaves towards the hole on the left.

Unlock Manifolds
 
 - This task is the little bar at the back of the reactor room. You must click the number buttons in ascending order from 0 to 10.


Start Reactor 
 
 - is a long task located in the reactor room There is a sequence, To complete this task, you must repeat the patterns shown on the left by pressing the buttons on the panel to the right.


Prime Shields 
 
 - a task located in Shields,  Simply click on all the red hexagons to finish the task.



Clear Asteroids 

 - a long visual task when u must Sit on the gunner’s seat and click on the flying asteroids to destroy them.


Fuel Engines 

 - is a long task locates in Storage and both lower and Upper engine you need to reach them and to fill up gas by holding down the button.